Cube

Standards require that specimens are cast in accurately machined Moulds. The Moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be maintained to ensure consistent test results. A calibration service is available.

Superior quality Concrete Cube Mould
Cast Iron construction
Unique two part design with diagonal joint
Easy to use and clean
Clamp type steel baseplate
Individual Serial numbers
Certificate of Conformity to BS1881part 108, EN12390-1 &/or ISO1920

Standards require that specimens are cast in accurately machined Moulds. The moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be
maintained to ensure consistent test results. A calibration service is available.

Field Cube Moulds
* Cast Iron construction
* Four part design
* Clamp type steel baseplate
* Meets requirements of BS1881 part 108,
EN12390-1 and ISO1920

Standards require that specimens are cast in accurately machined Moulds. The Moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be maintained to ensure consistent test results. A calibration service is available.

Superior quality Concrete Cube Mould
Cast Iron construction
Unique two part design with diagonal joint
Easy to use and clean
Clamp type steel baseplate
Individual Serial numbers
Certificate of Conformity to BS1881part 108, EN12390-1 &/or ISO1920

Standards require that specimens are cast in accurately machined Moulds. The moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be
maintained to ensure consistent test results. A calibration service is available.

Field Cube Moulds
* Cast Iron construction
* Four part design
* Clamp type steel baseplate
* Meets requirements of BS1881 part 108,
EN12390-1 and ISO1920

Standards require that specimens are cast in accurately machined Moulds. The moulds should be capable of withstanding heavy usage without suffering distortion. It is important that these tolerances can be
maintained to ensure consistent test results. A calibration service is available.

Field Cube Moulds
* Cast Iron construction
* Four part design
* Clamp type steel baseplate

EN12390-1

Lightweight Mould, sample is ejected using air or water pressure.

Do not meet Dimension and flatness requirements of EN12390-1

Lightweight Mould, sample is ejected using air or water pressure.

Do not meet Dimension and flatness requirements of EN12390-1

Polystyrene Moulds are ideal for testing low strength concrete where testing accuracy is not essential.
They do not meet the size and flatness tolerances of EN12350-1 but are very light and easy to use.
The 100mm Moulds come boxed in 125s, so need to be ordered in multiples of 125

Polystyrene Moulds are ideal for testing low strength concrete where testing accuracy is not essential.
They do not meet the size and flatness tolerances of EN12350-1 but are very light and easy to use.
The 150mm Moulds come boxed in 48's, so need to be ordered in multiples of 48